Detailed Eect Settings
9
DELAY
This eect adds delayed sound to the direct sound, giving more body to
the sound or creating special eects.
Parameter/Range Explanation
ON/OFF
OFF, ON Turns the DELAY eect on/o.
TYPE
This selects which type of delay.
SINGLE This is a simple delay.
PAN
This delay is specically for stereo output. This allows
you to obtain the tap delay eect that divides the
delay time, then deliver them to L and R channels.
INPUT
OUTPUT L
FEEDBACK
DLY TIME
E.LEVEL
DELAY
DLY TIME (Delay Time)
1ms–1000ms This determines the delay time.
FEEDBACK
0–100
This sets the amount of delay sound returned to the
input.
A higher value will increase the number of the delay
repeats.
Feedback is returning a delay signal to the input.
HIGH CUT (High Cut Filter)
700Hz–11kHz, FLAT
This sets the frequency at which the high cut lter
begins to take eect. When “FLAT” is selected, the high
cut lter will have no eect.
E.LEVEL (Eect Level)
0–120 Adjusts the volume of the delay sound.
D.LEVEL (Direct Level)
0–100 Adjusts the volume of the direct sound.
TAP TIME *1
0–100%
Adjusts the delay time of the left channel delay.
This setting adjusts the L channel delay time relative
to the R channel delay time (considered as 100%).
*1. Setting available when TYPE is set to PAN.
ACOUSTIC SIMULATOR
Simulation of the characteristics of particular guitar components such as
pickups and dierent guitar bodies allows you to switch among a number
of dierent guitar types all while using a single guitar.
Parameter/Range Explanation
ON/OFF
OFF, ON Turns the ACOUSTIC SIMULATOR eect on/o.
TYPE
Selects the type of the acoustic simulator.
S
AC
Changes a single-coil pickup tone to an acoustic
guitar tone.
H
AC
Changes a humbucking pickup tone to an acoustic
guitar tone.
LOW
-50–+50 Adjusts the tone for the low frequency range.
HIGH
-50–+50 Adjusts the tone for the high frequency range.
Parameter/Range Explanation
BODY
0–100
The body sound increases as the value is raised;
reducing the value produces a tone similar to that
from a piezo pickup.
LEVEL
0–100 Adjusts the volume.
GUITAR TO BASS
Simulates the sound of a bass guitar. Obtain the sound of a bass guitar
while playing an electric guitar.
MEMO
You should avoid playing chords when using the GUITAR TO
BASS.
Parameter/Range Explanation
ON/OFF
OFF, ON Turns the GUITAR TO BASS eect on/o.
TYPE
Select the type of GUITAR TO BASS processor.
JB The sound of a Fender Jazz Bass.
PB The sound of a Fender Precision Bass.
REAR VOL (Rear Volume) *1
0–100
Sets the volume of the rear pickup. With a setting of 0,
there will be no sound.
FRONT VOL (Front Volume) *1
0–100
Sets the volume of the front pickup. With a setting of
0, there will be no sound.
TONE
0–100 Adjusts the tone.
LEVEL
0–100 Adjusts the volume.
*1. Setting available when TYPE is set to JB.
Comentários a estes Manuais